What is Soff-Cut®?

Husqvarna’s Soff-Cut® saws are a unique patent that is designed for Ultra Early Entry™ concrete sawing. This system enables concrete to be cut within one to two hours before the final set. It is the best solution for minimizing the risk of random cracking, which is one of the most costly and aggravating problems for a concrete contractor. Husqvarna's Soff-Cut® saws’ high production rates combined with the opportunity to pour and cut the same day. Also, the straight lines achieved by only shallow cutting depths make Soff-Cut® the perfect system. Order online or call us to get your Husqvarna Soff-Cut® saw today. Or check out Husqvarna's Soff-Cut System video to learn more

 

 

The Process

Random cracking in concrete is one of the most aggravating problems faced by a concrete contractor. It costs contractors time, money and their reputation if faced with random cracks in concrete. Husqvarna's Soff-Cut® system is the one way to reduce the chance of random cracking through the timing of the cuts. Control joints are cut into the concrete as a part of the finishing process. Soff-Cut® system focuses on making these early entry cuts inside of the concrete's Green Zone™, or the first two hours after finishing and before the final set. As the concrete sets, it starts to take in moisture, which causes cracks. Husqvarna's Soff-Cut® system allows for control joints to be made at this time to prevent these random cracks.

Shallow contraction joint cut- why you soff-cut

Shallow contraction joint cut

Random Cracking in concrete- why you soff-cut

Random Cracking in concrete

 

 

The Green Zone™

Green Zone for Soff-Cut

The Green Zone is approximately 2 hours after placing and finishing

 

The Green Zone™ is the window of opportunity to cut the concrete before it has the chance to seek relief in the form of random cracking. The Green Zone™ falls between the initial set and the final set, normally 2 hours after finishing. To detect the Green Zone™, you will want to touch, step, and roll the machine onto the concrete. If an impression is made the concrete, it is not in the Green Zone™ and should not be cut. To optimize cutting in the Green Zone™, Husqvarna Soff-Cut® saws have a specially designed blade block, skid plate, and should be equipped with a specially designed Soff-Cut® diamond blade. Cutting in the Green Zone™ also allows for a shallower cut. This achieves greater aggregate interlock and minimizes the amount of joint filler needed.

 
 

 

 

Selecting Your Husqvarna Soff-Cut® Saw

There are two categories of Husqvarna Soff-Cut® saws, push and self-propelled. Before selecting a Soff-Cut® saw think about the size of the concrete slab you need to cut. For a small concrete patio or sidewalk, it is recommended you use a smaller, lighter Soff-Cut saw like the x150. For larger concrete slabs like an airport runway, a large Soff-Cut saw is recommended, like the x5000. Check out Esch's line-up of Husqvarna Soff-Cut saws below.

For more information about selecting your Soff-Cut® saw, contact Esch and we will set you up with your perfect Soff-Cut® saws and blades.

 

Husqvarna Push Soff-Cut® Saws

Husqvarna Soff-Cut X150 Saw
(966844811)

Husqvarna Soff-Cut 150

Husqvarna Soff-Cut X150 D Saw
(966844810)

Husqvarna Soff-Cut 150 D Decorative

Husqvarna Soff-Cut X150E Electric Saw
(967973901)

Husqvarna Soff-Cut Saw Soff-Cut 150 E

 

 

 

 

Husqvarna Self-Propelled Soff-Cut Saws

Husqvarna Soff-Cut X2000 Saw
(966845303)

Husqvarna Soff-Cut 2000

Husqvarna Soff-Cut X2500 Saw
(966845403)

Husqvarna Soff-Cut 2500

Husqvarna Soff-Cut X4000 Saw
(966845504)

Husqvarna Soff-Cut 4000

 

 

 

Husqvarna Soff-Cut X4200 Saw
(966845604)

 

Husqvarna Soff-Cut 4200

Husqvarna Soff-Cut X5000 Saw
(966845704)

 

Husqvarna Soff-Cut 5000

 

 

  • HTML Snippets Powered By : XYZScripts.com