Handheld Cut-off Saw Safety
Before using your cut-off saw, make sure to do a quick inspection.
- Check the machine for loose or missing fasteners
- Make sure to replace and/or tighten all screws and bolts.
- Check the throttle trigger, trigger interlock, and stop switch to make sure they are functioning properly.
- Inspect the wheel guard to make sure it is properly mounter and doesn't have any cracks or other damage.
- Never alter your cutoff machine's blade guard.
- Inspect the wheel that you are using.
- Make sure it is the proper wheel for the work you are doing.
- Look for: missing segments, cracks in the blade's core, water saturation of abrasive wheels.
- Make sure that your blade flanges are in good condition, and make sure the blade is properly mounted on the saw.
- Make sure that your belt has been properly tensioned.
- Hold the cut-off machine firmly with both hands.
- Maintain good balance and stable footing.
- Do not stand directly behind the plane of the blade.
- Allow the blade to do the grinding, do not force the blade into the material.
- Do not attempt to change the direction of the cut while the blade is in the cut, this can cause the blade to pinch and kick back.
- Avoid cutting with the upper quadrant of the blade, this will result in higher chance of kickback.
- Do not cut above your head.
FOR MORE ESCH BEST PRACTICES CLICK BELOW: